The Mahindra OJA 2130 is identified here by its own engine and driveline data, rather than by the broad horsepower category used in the catalogue. Its published combination is 3 cylinders, 83.7 Nm peak torque and a rated engine speed of 3000 rpm. The 8F+4R/ 8F+8R/ 12 F + 12 R gear arrangement and 950 kg hydraulic rating are central to deciding which farm tasks deserve a demonstration.
Current manufacturer listing; a new-launch date has not been independently verified for this article.
Technical specifications
| Power bracket on manufacturer page | 15.7 kW TO 25.7 kW (21 TO 35 HP) | ↗ |
|---|---|---|
| Maximum torque | 83.7 Nm | ↗ |
| Engine cylinders | 3 | ↗ |
| Drive type | 4WD | ↗ |
| Rated engine speed | 3000 | ↗ |
| Steering | Power steering | ↗ |
| Transmission | Constant mesh with synchro shuttle | ↗ |
| Clutch | Single / Dual | ↗ |
| Gear count | 8F+4R/ 8F+8R/ 12 F + 12 R | ↗ |
| Brakes | OIB | ↗ |
| Rear tyre | 241.3 mm x 457.2 mm (9.5 in x 18 in) | ↗ |
| Hydraulic lift rating | 950 | ↗ |
| PTO speed or system | 540, 540E | ↗ |
Higher rated speed is the prominent engine distinction
The 2130 entry lists a 3,000 rpm rated engine speed and 83.7 Nm maximum torque. In this OJA group that differs from the 2,700 rpm and 83 Nm shown for the 2127. These figures describe different aspects of engine operation and should not be multiplied into an invented productivity claim. A field demonstration should use the 2130’s recommended operating point for the chosen attachment, with the engine and PTO speed indicators explained to the operator.
Three listed gear combinations require an exact quote
The 2130 specification includes 8 F+4 R,8 F+8 R and 12 F+12 R. This is too much variation to reduce to a single unqualified “12-speed” statement. Before comparing prices, have the supplier identify the transmission and clutch supplied with each offer. A lower quote may refer to a different configuration. Do not assume that the most prominent promotional feature is standard across all three combinations.
A different rear-tyre size, unchanged headline lift
The 2130 lists 9.5 x 18 rear tyres rather than the 8.3 x 20 entry on the 2124 and 2127 pages. Its lift entry remains 950 kg. Wheel markings describe a configuration, not the complete outside width of the tractor. Where the machine must pass between a crop and irrigation equipment, obtain the actual overall measurements with the quoted tyres. The relevant clearance includes the attached implement and any protruding fittings.
OJA configuration deserves a closer check
The OJA page combines shuttle gearing with alternative clutch or gear entries. Treat those alternatives as a configuration question, especially if electronic PTO controls or a creeper package are discussed by the dealer. A feature shown in a promotional panel is not proof that it is included in the quoted machine. Request an itemised equipment sheet and operate the forward/reverse control during the handover demonstration.
Small torque change, different operating speed
The 2130 specification lists 83.7 Nm, a 3,000 rpm rated speed and 9.5 x 18 rear tyres. These should not be replaced with the 2127 figures merely because both sit in the OJA compact family. Tyre dimensions affect the physical configuration; horsepower category alone does not describe row clearance.
Delivery checks tied to this specification
Two entries to carry into the OJA 2130 delivery inspection are Rear tyre: 241.3 mm x 457.2 mm (9.5 in x 18 in); PTO speed or system: 540, 540 E. Match these to the machine being supplied rather than to a photograph in a general brochure. Where an alternative is written in the table, have the supplier mark the selected option. This is particularly useful when two dealer quotations use the same model name but include different equipment. Keep the dated configuration sheet with the invoice so future parts enquiries refer to the delivered specification.
Price status and a useful ownership calculation
A verified model-specific ex-showroom price for the OJA 2130 is not available in this article. Record a local quote with the exact configuration above, then separate registration, insurance, transport and optional attachments. For ownership planning, use your observed diesel consumption for the intended work and the service schedule supplied with that configuration. Do not turn an overall manufacturer price range into a price for this tractor, and do not present an assumed state tax percentage as a confirmed on-road charge.
Features and equipment
- 8F+4R/ 8F+8R/ 12 F + 12 R transmission selection
- 950 kg listed lift rating
- 3-cylinder engine
Strengths and points to check
Strengths
- Published 8F+4R/ 8F+8R/ 12 F + 12 R gear choice makes the operating layout clear
- 950 kg lift figure supports a concrete implement discussion
Considerations
- Exact horsepower is not resolved by the broad power bracket in this table
- Local price, fuel use and optional equipment require separate confirmation
Editorial interpretation of published specifications, not a hands-on road test.
Variants, price and state-wise quotation
| Variant / configuration | Price context |
|---|---|
| OJA 2130 | — A dated local dealer quotation is required; no model-specific price was verified. · ↗ |
State-wise ex-showroom and on-road quotes are not verified for this model. The amount can depend on city, variant, insurance and registration. Select your state in the calculator and enter an itemised local quotation; no automatic tax rate or subsidy is assumed.
Sources and editorial notes
Specifications are manufacturer claims and may differ by trim. Published information can change; confirm the exact vehicle before making a decision.
Information still to verify
- Verified local ex-showroom and on-road quotation
- Licensed model-specific photograph
- Independent field fuel-consumption measurement
- Manufacturer power field is a family range; exact model HP and alternative gearbox/clutch package require brochure confirmation