Mahindra JIVO 365 DI 4WD: engine, transmission, hydraulics and farm-use details

Technical specifications

Engine figures and what they mean

For the JIVO 365 DI 4 WD, the useful distinction is between torque, rated speed and engine power. The 118 Nm torque entry describes turning force; it does not establish fuel consumption per acre. The power line on this manufacturer page is a range, so this article preserves it as a bracket instead of silently converting it to a single horsepower number. Ask for the delivered engine identification and a workload demonstration with your own implement.

Transmission and field workflow

The listed transmission for the JIVO 365 DI 4 WD is Constant Mesh with Sync Shuttle, paired with 8 F + 8 R. These figures describe the available forward and reverse selections; they do not mean every ratio is appropriate for every operation. During a demonstration, check whether the working gear holds the desired pace without excessive clutch slipping. Also identify the exact clutch option on the quotation: a slash between alternatives in a specification table should not be read as two systems fitted simultaneously.

Hydraulics, PTO and implement matching

The 900 kg hydraulic entry for the JIVO 365 DI 4 WD is a lift-system rating, not a trailer payload allowance. An attachment also needs compatible linkage geometry, adequate stability and the correct PTO arrangement. The page identifies the PTO as 540/750; obtain the operating-speed explanation for the exact version before connecting driven equipment. A heavier implement cannot be approved solely because its mass is below the headline lift figure. Transport position, ballast and the attachment manual still matter.

Shuttle gearing and edition identity

The 365 DI listing has three cylinders,118 Nm,8 F+8 R and 900 kg lift. Its URL refers to a puddling-special edition while the visible heading is shorter. Confirm the exact edition and supplied tyres before using its figures in a paddy-work comparison. The 540/750 PTO entry also differs from the 540/540 E notation on several other JIVO pages.

Delivery checks tied to this specification

Two entries to carry into the JIVO 365 DI 4 WD delivery inspection are Rear tyre: 241.3 mm x 508 mm (9.5 in x 20 in); PTO speed or system: 540/750. Match these to the machine being supplied rather than to a photograph in a general brochure. Where an alternative is written in the table, have the supplier mark the selected option. This is particularly useful when two dealer quotations use the same model name but include different equipment. Keep the dated configuration sheet with the invoice so future parts enquiries refer to the delivered specification.

Price status and a useful ownership calculation

A verified model-specific ex-showroom price for the JIVO 365 DI 4 WD is not available in this article. Record a local quote with the exact configuration above, then separate registration, insurance, transport and optional attachments. For ownership planning, use your observed diesel consumption for the intended work and the service schedule supplied with that configuration. Do not turn an overall manufacturer price range into a price for this tractor, and do not present an assumed state tax percentage as a confirmed on-road charge.

Features and equipment

• 8 F + 8 R transmission selection
• 900 kg listed lift rating
• 3-cylinder engine

Strengths and points to check

Editorial interpretation of published specifications, not a hands-on road test.

Variants, price and state-wise quotation

State-wise ex-showroom and on-road quotes are not verified for this model. The amount can depend on city, variant, insurance and registration. Select your state in the calculator and enter an itemised local quotation; no automatic tax rate or subsidy is assumed.

Build your on-road estimate ↗

Sources and editorial notes

• Mahindra JIVO 365 DI 4WD official specifications ↗

Specifications are manufacturer claims and may differ by trim. Published information can change; confirm the exact vehicle before making a decision.