The Mahindra OJA 2124 is identified here by its own engine and driveline data, rather than by the broad horsepower category used in the catalogue. Its published combination is 3 cylinders, 83 Nm peak torque and a rated engine speed of 2400 rpm. The 8F+ 8R/12 F + 12 R gear arrangement and 950 kg hydraulic rating are central to deciding which farm tasks deserve a demonstration.
Current manufacturer listing; a new-launch date has not been independently verified for this article.
Technical specifications
| Power bracket on manufacturer page | 15.7 kW TO 25.7 kW (21 TO 35 HP) | ↗ |
|---|---|---|
| Maximum torque | 83 Nm | ↗ |
| Engine cylinders | 3 | ↗ |
| Drive type | 4WD | ↗ |
| Rated engine speed | 2400 | ↗ |
| Steering | Power steering | ↗ |
| Transmission | Constant mesh with synchro shuttle | ↗ |
| Clutch | Single / Dual | ↗ |
| Gear count | 8F+ 8R/12 F + 12 R | ↗ |
| Brakes | OIB | ↗ |
| Rear tyre | 210.82 mm x 508 mm (8.3 in x 20 in) | ↗ |
| Hydraulic lift rating | 950 | ↗ |
| PTO speed or system | 540, 540E | ↗ |
Two official descriptions need to be separated
Mahindra’s FAQ describes the 2124 as a 24 HP tractor, but the specification table displays a 21–35 HP category bracket. The table also gives 83 Nm and 2,400 rpm. This article does not treat the entire bracket as the output of one engine. When documenting a 2124, retain the exact brochure and engine identification with the sale paperwork; the broad online filter category is insufficient to resolve every engine specification.
Eight-speed and twelve-speed entries are alternatives
The 2124 table lists 8 F+8 R/12 F+12 R, while the promotional shuttle feature highlights 12 x 12. A buyer who regularly reverses at row ends needs to identify which transmission is actually offered. Ask the dealer to demonstrate the reverser and explain when the clutch is used. The number of selectable ratios is different from the operator’s control sequence, and the latter should be learned on the supplied configuration.
A950kg lift figure on a compact4WD
The 2124’s 950 kg lift entry should be considered together with the selected attachment’s centre of gravity and the tractor’s stability limits. The page lists 8.3 x 20 rear tyres and 4 WD, but neither specification establishes that a particular sprayer or rotavator fits safely. For orchard use, measure the complete attachment width and the clearance needed to turn at the end of a row, rather than measuring the tractor alone.
OJA configuration deserves a closer check
The OJA page combines shuttle gearing with alternative clutch or gear entries. Treat those alternatives as a configuration question, especially if electronic PTO controls or a creeper package are discussed by the dealer. A feature shown in a promotional panel is not proof that it is included in the quoted machine. Request an itemised equipment sheet and operate the forward/reverse control during the handover demonstration.
A lower rated speed than the OJA 2127
The OJA 2124 table pairs 83 Nm with 2,400 rpm; the 2127 table also lists 83 Nm but at a 2,700 rpm rated engine speed. Equal peak torque does not make these identical engines in use. Compare the required engine operating point for the intended attachment rather than ranking them solely by the model number.
Delivery checks tied to this specification
Two entries to carry into the OJA 2124 delivery inspection are Rear tyre: 210.82 mm x 508 mm (8.3 in x 20 in); PTO speed or system: 540, 540 E. Match these to the machine being supplied rather than to a photograph in a general brochure. Where an alternative is written in the table, have the supplier mark the selected option. This is particularly useful when two dealer quotations use the same model name but include different equipment. Keep the dated configuration sheet with the invoice so future parts enquiries refer to the delivered specification.
Price status and a useful ownership calculation
A verified model-specific ex-showroom price for the OJA 2124 is not available in this article. Record a local quote with the exact configuration above, then separate registration, insurance, transport and optional attachments. For ownership planning, use your observed diesel consumption for the intended work and the service schedule supplied with that configuration. Do not turn an overall manufacturer price range into a price for this tractor, and do not present an assumed state tax percentage as a confirmed on-road charge.
Features and equipment
- 8F+ 8R/12 F + 12 R transmission selection
- 950 kg listed lift rating
- 3-cylinder engine
Strengths and points to check
Strengths
- Published 8F+ 8R/12 F + 12 R gear choice makes the operating layout clear
- 950 kg lift figure supports a concrete implement discussion
Considerations
- Exact horsepower is not resolved by the broad power bracket in this table
- Local price, fuel use and optional equipment require separate confirmation
Editorial interpretation of published specifications, not a hands-on road test.
Variants, price and state-wise quotation
| Variant / configuration | Price context |
|---|---|
| OJA 2124 | — A dated local dealer quotation is required; no model-specific price was verified. · ↗ |
State-wise ex-showroom and on-road quotes are not verified for this model. The amount can depend on city, variant, insurance and registration. Select your state in the calculator and enter an itemised local quotation; no automatic tax rate or subsidy is assumed.
Sources and editorial notes
Specifications are manufacturer claims and may differ by trim. Published information can change; confirm the exact vehicle before making a decision.
Information still to verify
- Verified local ex-showroom and on-road quotation
- Licensed model-specific photograph
- Independent field fuel-consumption measurement
- Manufacturer power field is a family range; exact model HP and alternative gearbox/clutch package require brochure confirmation