The Mahindra OJA 2127 is identified here by its own engine and driveline data, rather than by the broad horsepower category used in the catalogue. Its published combination is 3 cylinders, 83 Nm peak torque and a rated engine speed of 2700 rpm. The 8F+4R/12 F + 12 R gear arrangement and 950 kg hydraulic rating are central to deciding which farm tasks deserve a demonstration.
Current manufacturer listing; a new-launch date has not been independently verified for this article.
Technical specifications
| Power bracket on manufacturer page | 15.7 kW TO 25.7 kW (21 TO 35 HP) | ↗ |
|---|---|---|
| Maximum torque | 83 Nm | ↗ |
| Engine cylinders | 3 | ↗ |
| Drive type | 4WD | ↗ |
| Rated engine speed | 2700 | ↗ |
| Steering | Power steering | ↗ |
| Transmission | Constant mesh with synchro shuttle | ↗ |
| Clutch | Single / Dual | ↗ |
| Gear count | 8F+4R/12 F + 12 R | ↗ |
| Brakes | OIB | ↗ |
| Rear tyre | 210.82 mm x 508 mm (8.3 in x 20 in) | ↗ |
| Hydraulic lift rating | 950 | ↗ |
| PTO speed or system | 540, 540E | ↗ |
The2127 is not simply a renamed2124
Although both OJA pages show 83 Nm, the 2127 lists 2,700 rpm compared with 2,400 rpm for the 2124. That is a model-specific distinction in the published operating data. It does not prove a particular increase in acres completed per hour. The current table still uses the 21–35 HP family bracket, so a single precise power output should be confirmed from the 2127’s own brochure rather than inferred from that range.
Resolve the reverse-gear ambiguity first
Mahindra’s 2127 table gives 8 F+4 R/12 F+12 R. Those choices differ substantially in the number of reverse ratios. A dealer quotation that promises only “shuttle transmission” leaves this unresolved. Identify the actual gear pattern and the delivered clutch option. For repeated short passes between closely spaced rows, the ease of selecting and controlling reverse is more relevant than simply choosing the largest total gear count.
The shared tyre and hydraulic package
The 2127 retains the 8.3 x 20 rear-tyre entry and 950 kg lift figure shown on the 2124 page. Consequently, a higher model designation should not be sold as evidence of a larger hydraulic rating. If the reason for upgrading is a heavier attachment, ask for an approved compatibility assessment. If the reason is travel-speed choice, request a demonstration of the specific gearbox instead; these are different purchasing questions.
OJA configuration deserves a closer check
The OJA page combines shuttle gearing with alternative clutch or gear entries. Treat those alternatives as a configuration question, especially if electronic PTO controls or a creeper package are discussed by the dealer. A feature shown in a promotional panel is not proof that it is included in the quoted machine. Request an itemised equipment sheet and operate the forward/reverse control during the handover demonstration.
Read the mixed gear listing carefully
The 2127 specification presents 8 F+4 R and 12 F+12 R alternatives. That is a substantial difference in reversing choice for work with frequent direction changes. Confirm which version the quote refers to; the presence of a 12 x 12 feature elsewhere on the page cannot prove that every machine has it.
Delivery checks tied to this specification
Two entries to carry into the OJA 2127 delivery inspection are Rear tyre: 210.82 mm x 508 mm (8.3 in x 20 in); PTO speed or system: 540, 540 E. Match these to the machine being supplied rather than to a photograph in a general brochure. Where an alternative is written in the table, have the supplier mark the selected option. This is particularly useful when two dealer quotations use the same model name but include different equipment. Keep the dated configuration sheet with the invoice so future parts enquiries refer to the delivered specification.
Price status and a useful ownership calculation
A verified model-specific ex-showroom price for the OJA 2127 is not available in this article. Record a local quote with the exact configuration above, then separate registration, insurance, transport and optional attachments. For ownership planning, use your observed diesel consumption for the intended work and the service schedule supplied with that configuration. Do not turn an overall manufacturer price range into a price for this tractor, and do not present an assumed state tax percentage as a confirmed on-road charge.
Features and equipment
- 8F+4R/12 F + 12 R transmission selection
- 950 kg listed lift rating
- 3-cylinder engine
Strengths and points to check
Strengths
- Published 8F+4R/12 F + 12 R gear choice makes the operating layout clear
- 950 kg lift figure supports a concrete implement discussion
Considerations
- Exact horsepower is not resolved by the broad power bracket in this table
- Local price, fuel use and optional equipment require separate confirmation
Editorial interpretation of published specifications, not a hands-on road test.
Variants, price and state-wise quotation
| Variant / configuration | Price context |
|---|---|
| OJA 2127 | — A dated local dealer quotation is required; no model-specific price was verified. · ↗ |
State-wise ex-showroom and on-road quotes are not verified for this model. The amount can depend on city, variant, insurance and registration. Select your state in the calculator and enter an itemised local quotation; no automatic tax rate or subsidy is assumed.
Sources and editorial notes
Specifications are manufacturer claims and may differ by trim. Published information can change; confirm the exact vehicle before making a decision.
Information still to verify
- Verified local ex-showroom and on-road quotation
- Licensed model-specific photograph
- Independent field fuel-consumption measurement
- Manufacturer power field is a family range; exact model HP and alternative gearbox/clutch package require brochure confirmation