The Mahindra OJA 3136 is identified here by its own engine and driveline data, rather than by the broad horsepower category used in the catalogue. Its published combination is 3 cylinders, 121 Nm peak torque and a rated engine speed of 2500 rpm. The 12 F + 12 R gear arrangement and 950 kg hydraulic rating are central to deciding which farm tasks deserve a demonstration.
Current manufacturer listing; a new-launch date has not been independently verified for this article.
Technical specifications
| Power bracket on manufacturer page | 26.5 kW TO 37.3 kW (36 TO 50 HP) | ↗ |
|---|---|---|
| Maximum torque | 121 Nm | ↗ |
| Engine cylinders | 3 | ↗ |
| Drive type | 4WD | ↗ |
| Rated engine speed | 2500 | ↗ |
| Steering | Power steering | ↗ |
| Transmission | Constant mesh with synchro shuttle | ↗ |
| Clutch | Single / Dual | ↗ |
| Gear count | 12 F + 12 R | ↗ |
| Brakes | OIB | ↗ |
| Rear tyre | 314.96 mm x 609.6 mm (12.4 in x 24 in) | ↗ |
| Hydraulic lift rating | 950 | ↗ |
| PTO speed or system | 540, 540E | ↗ |
The3136’s three-cylinder operating data
Mahindra lists 121 Nm, three cylinders and 2,500 rpm for the 3136. The power row is a 36–50 HP family bracket rather than an exact value, so it is retained as a bracket here. Unlike a measured field test, these specifications do not tell us the fuel required for a hectare of work. A useful comparison begins with the actual implement, working depth and soil condition, then records completed work alongside diesel consumed.
A clear12F+12R entry with clutch alternatives
The 3136 lists 12 forward and 12 reverse gears, unlike the mixed gear-count entries on several smaller OJA pages. Its clutch line still says single/dual. That unresolved choice matters when evaluating how travel and a driven implement are controlled. Ask for a demonstration of the supplied clutch and PTO controls together, rather than judging the machine from the gear count alone.
Do not infer lift capacity from the larger frame designation
The 3136 lists 12.4 x 24 rear tyres and 4 WD, but its hydraulic rating is 950 kg—the same headline lift figure as the 2124. That limits the usefulness of a simple “larger number is stronger” comparison. A mounted attachment’s weight distribution, linkage fit and transport clearance still need assessment. If hydraulic capacity is the deciding factor, compare the actual lift specification and approved attachment combination directly.
OJA configuration deserves a closer check
The OJA page combines shuttle gearing with alternative clutch or gear entries. Treat those alternatives as a configuration question, especially if electronic PTO controls or a creeper package are discussed by the dealer. A feature shown in a promotional panel is not proof that it is included in the quoted machine. Request an itemised equipment sheet and operate the forward/reverse control during the handover demonstration.
A larger engine figure does not imply more lift
The 3136 lists 121 Nm and 12 F+12 R, while its published lift remains 950 kg. This is a useful reminder to compare the hydraulic entry independently of the engine family. The 12.4 x 24 rear-tyre entry also distinguishes its chassis configuration from smaller OJA 2124 and 2127 listings.
Delivery checks tied to this specification
Two entries to carry into the OJA 3136 delivery inspection are Rear tyre: 314.96 mm x 609.6 mm (12.4 in x 24 in); PTO speed or system: 540, 540 E. Match these to the machine being supplied rather than to a photograph in a general brochure. Where an alternative is written in the table, have the supplier mark the selected option. This is particularly useful when two dealer quotations use the same model name but include different equipment. Keep the dated configuration sheet with the invoice so future parts enquiries refer to the delivered specification.
Price status and a useful ownership calculation
A verified model-specific ex-showroom price for the OJA 3136 is not available in this article. Record a local quote with the exact configuration above, then separate registration, insurance, transport and optional attachments. For ownership planning, use your observed diesel consumption for the intended work and the service schedule supplied with that configuration. Do not turn an overall manufacturer price range into a price for this tractor, and do not present an assumed state tax percentage as a confirmed on-road charge.
Features and equipment
- 12 F + 12 R transmission selection
- 950 kg listed lift rating
- 3-cylinder engine
Strengths and points to check
Strengths
- Published 12 F + 12 R gear choice makes the operating layout clear
- 950 kg lift figure supports a concrete implement discussion
Considerations
- Exact horsepower is not resolved by the broad power bracket in this table
- Local price, fuel use and optional equipment require separate confirmation
Editorial interpretation of published specifications, not a hands-on road test.
Variants, price and state-wise quotation
| Variant / configuration | Price context |
|---|---|
| OJA 3136 | — A dated local dealer quotation is required; no model-specific price was verified. · ↗ |
State-wise ex-showroom and on-road quotes are not verified for this model. The amount can depend on city, variant, insurance and registration. Select your state in the calculator and enter an itemised local quotation; no automatic tax rate or subsidy is assumed.
Sources and editorial notes
Specifications are manufacturer claims and may differ by trim. Published information can change; confirm the exact vehicle before making a decision.
Information still to verify
- Verified local ex-showroom and on-road quotation
- Licensed model-specific photograph
- Independent field fuel-consumption measurement
- Manufacturer power field is a family range; exact model HP and alternative gearbox/clutch package require brochure confirmation